here’s the output of bcf devices -v:
desc: Intel® Active Management Technology - SOL (COM3)
desc: USB Serial Port (COM4)
hwid: USB VID:PID=0403:6015
I tried on two different computers with several USB cables.
Neither bcf flash command neither flashing firmware.bin from Hardwario Playground works. Here’s the bcf flash output:
I think I was able to flash the latest firmware from Hardwario Playground right after I connected it for the first time. However I’m not sure since everything was quite new to me and it’s been few weeks.
It was bought as a motion detection kit.
When I power it up the LED stays on for few seconds. Pushing the button causes the LED to blink. However only with brand new batteries. Strange thing is that I have already fourth pair of batteries since I bought it (less than one month ago). I always remove the batteries after working with it. Even though the batteries loose their power pretty soon.
Please check https://drive.google.com/file/d/1HA97vy0dgrlunuNU56ZNZ_eh1z4gWvST/view for details (sorry for the large file).
I tried a friends core module and it behaves differently. My core module is of version R2.2. My friends core module is R2.4. When I connect my friends core module to an USB cable the LED blinks 3 times. Also the LED blinks after the USB is removed when the button is pushed. This is different with my core module.
Another strange thing is that my friends module produces the accelerometer events while my doesn’t.
Thanks and Regards,